ABS Module 47050-60010
Repair Service
Applications
Lexus LX470 UJZ100R 4.7L Petrol (1998-2000)
Toyota Landcruiser HDJ100R 4.2L Deisel (2000)
OEM / Genuine Part Numbers
47050-60010
Common Faults
Code 52 (C1252) Hydraulic Pump Motor Malfunction
Code 56 (C1256) Accumulator Low Pressure malfunction
Code 51 (C1251) Pump motor locked/open circuit
Code 23 (C1223) ABS Control system malfunction
Pump Motor running constantly or for extended period
Hard Pedal
Squealing noise from booster (Overpressure valve relief)
Brake Warning Buzzer on
Select Your Service Type
-
Repair
You send all components required for off-car testing, along with your diagnostic fault report
Repair Details
Warranty and returns: See Warranty Info
Melbourne Customers: You can drop off your part at our office for repair or exchange. Contact us for more details.
PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. Each repair service includes an extended testing procedure normally valued between $295-$395.
- We will cover postage for sending the repaired unit back to you.
- This is a prompt test and repair service of the customer's own unit.
- There will be a $295 test fee in case the unit is deemed not repairable.
- ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.
Critical Information
This is a test and repair service of the customers own unit
NOTE: Contact PecTech before sending your unit if your fault code or symptoms are not listed in the "Common Faults" tab
Code 54 (C1254) Pressure Switch Malfunction (PecTech is unable to repair for this fault code)
For Fault Code 53 (C1253) Pump motor relay malfunction (PecTech advises to Check/renew relay and related harness connections in vehicle)
Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PecTech.
Before removing pipes, clean all dust / grit off HBB/ABS unit and pipes.
DRAIN ALL BRAKE FLUID FROM RESERVOIR & SEAL ALL FLUID HOLES IN HYDRAULIC BLOCK TO ENSURE NO DIRT INGRESS.
To avoid any damage during transportation, we recommend sealing the unit in a strong plastic wrap, with bubble wrap or similiar and in a solid box.(ref image below)
Followed by packing the sealed box in a second box to reinforce it.
